SpeedyBee Master 5 V2 Spare Part 226mm Wheelbase 5 Inch Frame Kit / GPS Mount / Antenna Base for DIY Freestyle RC FPV Racing Drone
Direct purchase from the factory 
保證安全結帳
免費禮物
運送政策
退貨政策免費禮物
歡迎來到Roymall，您的專業購買高級百貨禮物的網站。我們非常重視並感謝您的支持，並希望通過為您的購買增添額外的驚喜來表達我們的感激之情。當您與我們一起購物時，您不僅可以享受提升生活品質的高品質產品，還可以在每次訂單中獲得獨家免費禮物。 準備好探索我們的收藏並找到您的完美禮物了嗎？瀏覽我們的高級百貨商品選擇，下訂單，並期待您的免費禮物與您的購買一起到來。運送政策
我們將努力在收到您的訂單後將商品安全送達您手中。運送詳情將在您的確認郵件中提供。在大多數情況下，訂單將在2天內處理。在特殊情況下，可能會延遲如下：當您在週六、週日或公共假期下訂單時，將延遲2天。通常需要5-7個工作日（週一至週五），不受航班延誤或其他環境因素影響。由於我們的運送服務是全球性的，運送時間將取決於您的位置，因此可能需要幾天時間，如果您位於偏遠地區或國家，請耐心等待。1. 退貨與換貨政策
我們僅接受在roymall.com購買的商品。如果您從我們的本地分銷商或其他零售商處購買，則無法在我們這裡退貨。 最終銷售商品或免費禮物不可退貨。要符合退貨條件，您的商品必須未使用且與收到時的狀態相同。還必須保留原始包裝。收到我們的退貨指示後，請將退貨商品打包並將包裹送至當地郵局或其他快遞服務。我們將在收到退貨商品後3-5個工作日內處理您的退貨或換貨。退款將自動處理並記入您的原始付款方式。如果商品是根據訂製生產的，包括訂製尺寸、訂製顏色或訂製印刷，則不可退貨或換貨。需要更多幫助，請聯繫我們。 service@roymall.com 或 Whatsapp: +8619359849471
2.退款政策
在我們收到並確認退貨包裹後，您將獲得全額退款或100%商店信用。退款將自動處理並記入您的原始付款方式。 請注意，運費及任何關稅或費用不可退款。包裹發貨後，額外運費不可退款。您需負責支付這些費用，我們無法免除或退款，即使訂單被退回給我們。一旦我們收到並確認您的退貨商品，我們將向您發送電子郵件，通知您我們已收到您的退貨商品。我們還將通知您退款的批准或拒絕。如果您在退款過程中有任何問題，請聯繫我們。 service@roymall.com 或 Whatsapp: +8619359849471Brand: SpeedyBee
Model: Master 5 V2
Optiona Version: Empty Frame Kit/Receiver Base/Capacitor & Beeper Base/ 121/181/220/151/880GPS Mount/
Antenna Base for DJI O3 /LED Protective Tube/Motor Wire Protective Sleeve/Stack Side Plate
Frame Kit Specification
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Frame | font-size:10.5000pt;mso-font-kerning:1.0000pt;">Master 5 V2 |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Wheelbase | font-size:10.5000pt;mso-font-kerning:1.0000pt;">226mm |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Weight | font-size:10.5000pt;mso-font-kerning:1.0000pt;">About 140g (non-3D printed parts included) |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Top plate thickness | font-size:10.5000pt;mso-font-kerning:1.0000pt;">2.5mm(T300 3K) |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Middle plate thickness | font-size:10.5000pt;mso-font-kerning:1.0000pt;">2mm(T300 3K) |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Bottom plate thickness | font-size:10.5000pt;mso-font-kerning:1.0000pt;">2.5mm(T300 3K) |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Arm thickness | font-size:10.5000pt;mso-font-kerning:1.0000pt;">5mm(T300 3K) |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Camera side plate thickness | font-size:10.5000pt;mso-font-kerning:1.0000pt;">2mm TUPC |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Anti-vibration stack structure hardness | font-size:10.5000pt;mso-font-kerning:1.0000pt;">Yellow HB80u3001Translucent HB50 |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">3D printed part | font-size:10.5000pt;mso-font-kerning:1.0000pt;">Yellow TPU |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Motor circlip spacing | font-size:10.5000pt;mso-font-kerning:1.0000pt;">u03a68mm |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Compatible propellers | font-size:10.5000pt;mso-font-kerning:1.0000pt;">5-5.1 inch |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Mounting holes for motors | font-size:10.5000pt;mso-font-kerning:1.0000pt;">16*16mm |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">FC mounting hole | font-size:10.5000pt;mso-font-kerning:1.0000pt;">30.5 x 30.5(M3) & 20 x 20mm (M3) |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Drone head | font-size:10.5000pt;mso-font-kerning:1.0000pt;">7075 CNC aluminum alloy |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Aluminum standoff | font-size:10.5000pt;mso-font-kerning:1.0000pt;">7075 M3*23mm*(6mm/4.7mm)u3001M3*23mm*(4.6mm) |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Internal installation height | font-size:10.5000pt;mso-font-kerning:1.0000pt;">23-30mm |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Standard antenna installation supporT | font-size:10.5000pt;mso-font-kerning:1.0000pt;">SMA (single), 4mm for DJI O3, RunCam Link |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Standard GPS base size | font-size:10.5000pt;mso-font-kerning:1.0000pt;">18*18*8mm (other size requiresan additional purchase) |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Rear Support Mounting Holes | font-size:10.5000pt;mso-font-kerning:1.0000pt;">20*20mm - 25.5*25.5mm - 30.5*30.5mm |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Detachable stack protective plate RGB LED | font-size:10.5000pt;mso-font-kerning:1.0000pt;"> included |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Motor wire protection | font-size:10.5000pt;mso-font-kerning:1.0000pt;">included |
Included 3D printed parts | font-size:10.5000pt;mso-font-kerning:1.0000pt;">base for Gopro, capacitor/buzzerbase, arm protection, 181GPS base, T-antenna base, CNC drone head TPU protection, camera anti-vibration module |
font-size:10.5000pt;mso-font-kerning:1.0000pt;">Buzzer | font-size:10.5000pt;mso-font-kerning:1.0000pt;">TMB12A05 |
Package Included:
| Version | Package Includded |
| Empty Frame Kit | 1x Master 5 V2 Frame 2x 250mm strap 1x bag of Screws & standoffs 1x Set of 3D Printing TPU Parts 1x 8pin cable 1x Red cable & black cable 4x LED Protective Tube 1x Beep |
| TPU Receiver Mount | 1x 3D Printing TPU Mount for Receiver |
| Capacitor & Beeper Base | 1x 3D Printing TPU Base for Capacitor & Beeper |
| 121/181/220/151/880GPS Mount/ ( Optional) | 1x 3D Printing TPU GPS Mount for 121/181/220/151/880GPS |
| Antenna Base for DJI O3 | 1x 3D Printing TPU Antenna Base for DJI O3 |
| LED Protective Tube | 4x LED Protective Tube |
| Motor Wire Protective Sleeve | 4x Motor Wire Protective Sleeve |
| Stack Side Plate | 1x Stack Side Plate L+R |
