NI-210 Professional VI Curve Tester Circuit Board Tester Tool With Two-Channel Simultaneous Display
44
Direct purchase from the factory 
保證安全結帳
免費禮物
運送政策
退貨政策免費禮物
歡迎來到Roymall，您的專業購買高級百貨禮物的網站。我們非常重視並感謝您的支持，並希望通過為您的購買增添額外的驚喜來表達我們的感激之情。當您與我們一起購物時，您不僅可以享受提升生活品質的高品質產品，還可以在每次訂單中獲得獨家免費禮物。 準備好探索我們的收藏並找到您的完美禮物了嗎？瀏覽我們的高級百貨商品選擇，下訂單，並期待您的免費禮物與您的購買一起到來。運送政策
我們將努力在收到您的訂單後將商品安全送達您手中。運送詳情將在您的確認郵件中提供。在大多數情況下，訂單將在2天內處理。在特殊情況下，可能會延遲如下：當您在週六、週日或公共假期下訂單時，將延遲2天。通常需要5-7個工作日（週一至週五），不受航班延誤或其他環境因素影響。由於我們的運送服務是全球性的，運送時間將取決於您的位置，因此可能需要幾天時間，如果您位於偏遠地區或國家，請耐心等待。1. 退貨與換貨政策
我們僅接受在roymall.com購買的商品。如果您從我們的本地分銷商或其他零售商處購買，則無法在我們這裡退貨。 最終銷售商品或免費禮物不可退貨。要符合退貨條件，您的商品必須未使用且與收到時的狀態相同。還必須保留原始包裝。收到我們的退貨指示後，請將退貨商品打包並將包裹送至當地郵局或其他快遞服務。我們將在收到退貨商品後3-5個工作日內處理您的退貨或換貨。退款將自動處理並記入您的原始付款方式。如果商品是根據訂製生產的，包括訂製尺寸、訂製顏色或訂製印刷，則不可退貨或換貨。需要更多幫助，請聯繫我們。 service@roymall.com 或 Whatsapp: +8619359849471
2.退款政策
在我們收到並確認退貨包裹後，您將獲得全額退款或100%商店信用。退款將自動處理並記入您的原始付款方式。 請注意，運費及任何關稅或費用不可退款。包裹發貨後，額外運費不可退款。您需負責支付這些費用，我們無法免除或退款，即使訂單被退回給我們。一旦我們收到並確認您的退貨商品，我們將向您發送電子郵件，通知您我們已收到您的退貨商品。我們還將通知您退款的批准或拒絕。如果您在退款過程中有任何問題，請聯繫我們。 service@roymall.com 或 Whatsapp: +8619359849471
Attention:
It needs to be used with an oscilloscope, and there is no high requirement on the oscilloscope, as long as it is a dual trace oscilloscope. Both analog and digital oscilloscopes can be used (low-end digital oscilloscope xy mode display effect and response speed are a bit worse).
Features:
- Dual-channel signal input
- Two channels display 3 frequencies at the same time
- 5 adjustable voltages: 3V, 10V, 15V, 20V and 60V
- Channel A, channel B, channel A+B display
- With scanning function
- Adjust the position of channel B for easy comparison and measurement
- AC/DC trigger output with adjustable amplitude and width
Summary of the VI Tester:
1. ASA test application characteristics:
Analog Signature Analysis is a fault detection technique widely used in electronic circuit board. Has the following application characteristics:
1.1. It does not involve the circuit principle and does not need the circuit to be in working condition, so it can be used for fault detection of the circuit board without drawings and data, which is out of the equipment (without online testing).
1.2. There is no need to power up the circuit board, which is relatively safer.
1.3. It does not involve the function of the components on the circuit board, so no matter what type of device the circuit is composed of, digital, analog, mixed digital-analog, known functions, unknown (such as dedicated, programmable), etc. can be tested.
1.4. It is tested on a circuit-by-circuit node (device pin), and is basically not limited by the packaging of components on the circuit board. Since a single device can be regarded as the simplest circuit board circuit, ASA technology can also be used to detect the quality of large-scale, complex or integrated devices with unknown functions. In fact, due to limited conditions, ASA is the only way for many users to detect such devices. In addition, when ASA is used to detect the function of discrete components, it is also convenient and intuitive.
2. The basic test principle of ASA:
As far as the basic detection principle is concerned, the ASA test can be seen as a natural extension of the multimeter detection method.
For circuit board without drawings, the most commonly used fault detection method is as follows: first use a multimeter to measure the resistance of the device pins on the circuit board (actually the circuit node) to ground; and then compare it with the corresponding device pins on the failed circuit board. Compare the ground resistance, and judge whether there is a fault on the node according to the difference. From node to specific components need to be manually determined. This method is simple, easy to use and effective. Many people have used this method to repair complex and expensive circuit board.
The main reason for the failure detection rate of this method is that the multimeter can only detect the resistance under 1.5V (multimeter battery voltage), and the ground resistance of the semiconductor device pin changes with the voltage-the resistance under different voltages may not be same. For example, a TTL device pin has a soft breakdown at 2.5V, resulting in a large leakage current. Such failures cannot be detected.
Imagine you have dozens or hundreds of multimeters, and the battery voltage of each meter is different-the voltage range includes the working voltage of the device. For each pin, use these tables to test and compare all of them, so that the above-mentioned faults will be detected. This is the principle of ASA testingu2014comparison in a voltage range, not just at a voltage point.
Package Included:
1 x Set of IV Curve Tester
Note:
- Battery is not included.
It needs to be used with an oscilloscope, and there is no high requirement on the oscilloscope, as long as it is a dual trace oscilloscope. Both analog and digital oscilloscopes can be used (low-end digital oscilloscope xy mode display effect and response speed are a bit worse).
Features:
- Dual-channel signal input
- Two channels display 3 frequencies at the same time
- 5 adjustable voltages: 3V, 10V, 15V, 20V and 60V
- Channel A, channel B, channel A+B display
- With scanning function
- Adjust the position of channel B for easy comparison and measurement
- AC/DC trigger output with adjustable amplitude and width
Summary of the VI Tester:
1. ASA test application characteristics:
Analog Signature Analysis is a fault detection technique widely used in electronic circuit board. Has the following application characteristics:
1.1. It does not involve the circuit principle and does not need the circuit to be in working condition, so it can be used for fault detection of the circuit board without drawings and data, which is out of the equipment (without online testing).
1.2. There is no need to power up the circuit board, which is relatively safer.
1.3. It does not involve the function of the components on the circuit board, so no matter what type of device the circuit is composed of, digital, analog, mixed digital-analog, known functions, unknown (such as dedicated, programmable), etc. can be tested.
1.4. It is tested on a circuit-by-circuit node (device pin), and is basically not limited by the packaging of components on the circuit board. Since a single device can be regarded as the simplest circuit board circuit, ASA technology can also be used to detect the quality of large-scale, complex or integrated devices with unknown functions. In fact, due to limited conditions, ASA is the only way for many users to detect such devices. In addition, when ASA is used to detect the function of discrete components, it is also convenient and intuitive.
2. The basic test principle of ASA:
As far as the basic detection principle is concerned, the ASA test can be seen as a natural extension of the multimeter detection method.
For circuit board without drawings, the most commonly used fault detection method is as follows: first use a multimeter to measure the resistance of the device pins on the circuit board (actually the circuit node) to ground; and then compare it with the corresponding device pins on the failed circuit board. Compare the ground resistance, and judge whether there is a fault on the node according to the difference. From node to specific components need to be manually determined. This method is simple, easy to use and effective. Many people have used this method to repair complex and expensive circuit board.
The main reason for the failure detection rate of this method is that the multimeter can only detect the resistance under 1.5V (multimeter battery voltage), and the ground resistance of the semiconductor device pin changes with the voltage-the resistance under different voltages may not be same. For example, a TTL device pin has a soft breakdown at 2.5V, resulting in a large leakage current. Such failures cannot be detected.
Imagine you have dozens or hundreds of multimeters, and the battery voltage of each meter is different-the voltage range includes the working voltage of the device. For each pin, use these tables to test and compare all of them, so that the above-mentioned faults will be detected. This is the principle of ASA testingu2014comparison in a voltage range, not just at a voltage point.
Package Included:
1 x Set of IV Curve Tester
Note:
- Battery is not included.
