0已按讚

Happymodel Moblite7 V3.0 Walksnail 1S 75mm HD Whoop FPV Racing Drone with Walksnail Avatar Nano HD Digital System

4.5

★★★★★

115

$245.99 /$300.11

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$233.99 /$300.11

立即購買加入購物車

信用卡或借記卡

保證安全結帳

免費禮物

任何購買均可獲得免費禮物

運送政策

訂單超過$9.9免標準運費

退貨政策

退貨將在收到商品後40天內接受。客製化商品不可退貨或換貨。使用電子禮品卡購買的商品僅可換貨；不適用退款。

免費禮物

歡迎來到Roymall，您的專業購買高級百貨禮物的網站。我們非常重視並感謝您的支持，並希望通過為您的購買增添額外的驚喜來表達我們的感激之情。當您與我們一起購物時，您不僅可以享受提升生活品質的高品質產品，還可以在每次訂單中獲得獨家免費禮物。準備好探索我們的收藏並找到您的完美禮物了嗎？瀏覽我們的高級百貨商品選擇，下訂單，並期待您的免費禮物與您的購買一起到來。

運送政策

我們將努力在收到您的訂單後將商品安全送達您手中。運送詳情將在您的確認郵件中提供。在大多數情況下，訂單將在2天內處理。在特殊情況下，可能會延遲如下：當您在週六、週日或公共假期下訂單時，將延遲2天。通常需要5-7個工作日（週一至週五），不受航班延誤或其他環境因素影響。由於我們的運送服務是全球性的，運送時間將取決於您的位置，因此可能需要幾天時間，如果您位於偏遠地區或國家，請耐心等待。

1. 退貨與換貨政策

我們僅接受在roymall.com購買的商品。如果您從我們的本地分銷商或其他零售商處購買，則無法在我們這裡退貨。最終銷售商品或免費禮物不可退貨。要符合退貨條件，您的商品必須未使用且與收到時的狀態相同。還必須保留原始包裝。收到我們的退貨指示後，請將退貨商品打包並將包裹送至當地郵局或其他快遞服務。
我們將在收到退貨商品後3-5個工作日內處理您的退貨或換貨。退款將自動處理並記入您的原始付款方式。如果商品是根據訂製生產的，包括訂製尺寸、訂製顏色或訂製印刷，則不可退貨或換貨。需要更多幫助，請聯繫我們。 service@roymall.com 或 Whatsapp: +8619359849471

2.退款政策

在我們收到並確認退貨包裹後，您將獲得全額退款或100%商店信用。退款將自動處理並記入您的原始付款方式。請注意，運費及任何關稅或費用不可退款。包裹發貨後，額外運費不可退款。您需負責支付這些費用，我們無法免除或退款，即使訂單被退回給我們。一旦我們收到並確認您的退貨商品，我們將向您發送電子郵件，通知您我們已收到您的退貨商品。我們還將通知您退款的批准或拒絕。如果您在退款過程中有任何問題，請聯繫我們。 service@roymall.com 或 Whatsapp: +8619359849471

V2.0 update log:

1. Changed to GNB27 connector and V4 frame, no need 3d print battery tray anymore.

2. Changed the propeller to Gemfan 1635-3 propellers.

V3.0 Update log:

1. ELRS RX Version, Flight Controller AIO ESC board change into SuperX HD ELRS Flight Controller

2. Frsky Receiver Versions still v2 version.

3. Changed to A30 connector

Notes:

1. Recommend use the battery with lead wire, both A30 and BT2.0 plug battery are compatible.

2. NOT Included Lipo battery!

Specification:

Brand: Happymodel

Model: Moblite7 Walksnail V3

Item Name: 1S 75mm HD Whoop FPV Racing Drone

Frame wheelbase: 75mm
Weight: 34.5 gram without battery
Size: 98mm*98mm*48mm
UART ELRS v3.0 ready
Compatible with 1S Lipo battery or Lihv battery
Battery Plug: GNB A30

Onboard blackbox ready

	New V3.0 Version	Old Version
Flight Controller	SuperX HD ELRS Flight Controller Betaflight 4.4.2 firmware readyFirmware target: CRAZYBEEF4DXMCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: BMI270 or ICM42688P (SPI connection)Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this droneBuilt-in 12A(each) Blheli_S 4in1 ESC Dshot300 readBuilt-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware updateBluejay ESC Firmware readyBuilt-in 5V 1A BECBuilt-in voltage detectionNo betaflight analog osd chip	SuperbeeF4 Lite ELRS/FRSKY SPI ELRS version Firmware target: CrazybeeF4SX1280 SPI FRSKY version Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHz, 512K FLASH) Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection) Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in SPI Frsky/ExpressLRS receiver Built-in 5V 1A BEC Built-in voltage detection
Onboard 4in1 ESC	Power supply: 1-2S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds)Support ESC-Configurator and BLHELI_S Suite configuratorFactory firmware: Z-H-30 u2013 Bluejay, 0.19, 48kHzDefault protocol: DSHOT300	MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV (2.8v~4.35v) Currents: 5A continuous peak 6A (5 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard Receiver	ELRS Receiver Version: Onboard UART ExpressLRS 2.4GHz Receiver RF Frequency: 2.4GHzAntenna: enameled copper wire 31mm lengthTelemetry output Power: <12dBmReceiver protocol: CRSFDefault firmware version: ExpressLRS V3.0.1The same hardware with Happymodel EP1 receiverCould update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through Frsky Receiver: Doesn"t have V3 Version.	ELRS Receiver Version: Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Could bind with ELRS V2.0 firmware TX module Frsky Receiver Version: SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt) Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m Based on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol

Motor	Model: 1002 20000KVConfigu-ration:9N12PStator Diameter:10mmStator Length:2mmShaft Diameter:u03a61.5mmMotor Dimension(Dia.Len):u03a613.5mm12.5mmWeight(g):2.5gNo.of Cells(Lipo):1S only
Propeller Gemfan 1610-2 Bi-blades ( V1 )	Weight:0.24gMaterial: PCPitch:1 inchProps Dia:40mmCenter Hole Dia:1.5mm
VTX	Model: Avatar mini 1s moduleCommunication Frequency: 5.725-5.850 GHzTransmitter Power(EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC: <20dBm;MIC:<25dBml/o Interface: JST1.O6(Power in)JST1.O4(USB)Mounting Holes: 25.525.5 mmDimensions: 3333*6.5 mmStorage: 8GRecording: 1080p/720pWeight: 6.8 gOperating Temperature: -20-40u2103Channels: 8Wide Power lnput: 3.1V-5VSupported FC System: BetaflightOSD: Canvas modeBitrate: 25mbps / 50mbpsLatency: Average delay 22msAntenna connector: IPEX
FPV Camera	Model: Avatar nanolmage Sensor: 1/2.7u201dInchResolution: 1080P/6Ofps,720P/120fps,72OP/6OfpsRatio: 16/9 4/3Lens: 2.1mmFOV 170u00b0Aperture: F2.0Shutter: Rolling shutterMin.Illumination: 0.001LuxWeight: 3.5gDimensions: 141417mmCoaxial Cable: 45mm

Package Included:

1x Moblite7 V3 Walksnail FPV Drone

1x Spare Canopy

1x Propeller disassemble tool

1x Screw driver

使用Paypal購買

Products related to this item

Loading related products...

❮

❯

Videos for similar product

Loading product videos...